Basic Info.
Number of Stator
Single-Phase
Function
Milling Lathe Wood
Casing Protection
Closed Type
Starting Mode
Variable Frequency Starting
Certification
ISO9001, CCC, CE
Specification
2.2kw 220v or 380v air cooled spindle
Product Description
HYCNC Hqd 2.2 Kw Air Cooling Spindle Motor For Cnc Lathe Milling Engraving Cooled Spindle Motor 220v Er20 Motor 2.2kw InverterRotating speed: 18000/24000RPM
Rated power: 2.2KW
Torque: 1.17/0.88Nm
Voltage: 220/380V
Current: 7.8/4.4A
Frequency: 300/400HZ
Connection of spindle end: ER20-Φ3.175-Φ13
Cooling: Water cooling
Lubrication: Grease
Bearing No.: 2*7005C P4,1*7002C P4Main Application: Engrave for wood,bamboo,normal PCB,PVC,PMMA,plastic,duotone board(ABS)and etc nonmetal, also can engrave on gold,silver,copper, aluminium,Pb etc soft metal surface working.(Please pay more attention, this is wood working spindle, only can used for wood working and aluminum working,please don't use it for steel. If you need steel
working,please check the metal spindle,thank you!)
1. HQD spindles all use P4 grade series bearings , compared with P5 bearings , its with higher precision .2.All P4 and RZ series , and its dust proof , and longer service life .3.Excellent quality rotary , making spindle more powerful .Motor starts to run, while it won't rotate or get stuck or very low speed ?During spindle in stock period or when transportation, grease inside the bearings state will change, users should running at low speed for 1-2 hours. Run 30 minutes each 6000 rpm and then then 12000rpm , 18000rpm , 24000rpm . Spindle and the inverter should be working together. The inverter's specifications and parameter settings need match spindles parameter. Must avoid directly connect spindle motor with 220v or 380v electricity.Connection for spindle and inverter ? inverter have U ,V , W , and spindle have pin 1 , 2,3,4 , 220v or 380v after connect with vfd , then inverter power cord should be welding like this : 1+U , 2+V , 3+W ,and spindle port 4 with the ground line . After the power on, to check whether the spindle rotation axis is same with indicated direction or not , If direction is on the contrary , please immediately turn off , replace the inverter and spindle connected two wires randomly .Spindle cooled daily maintenance ? every day before using ,spindle must start at low speed at 15-20 mintues. And the cooling system is working properly, for water pump to confirm pump inside the water , and for water chiller , sure cooling ability .
name:VFD 1.5kw
Brand:Rituo
model:DB620
Material:Engineering plastics
frequency:50/60hz
address:Jinan Shandong China
Voltage:220V/380V
Address:
Jinan, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Tools & Hardware
Management System Certification:
ISO 9001
Company Introduction:
Jinan Hongyang CNC Machinery Co., Ltd, founded in 2008 is a global famous supplier for CNC router accessories. Selling: Spindle, inverters, stepper motors, hybrid servos motors, drives, guide rails, sliders, gear box, racks, water chillers, reducers, CNC controller, transformers, power supply, vacuum cleaner, dust hood, tool sensor, limit sensor, lubricant oil pump, linear atc with cutters, round atc with cutters, cylinder, cable chain towline, engraving cutters, control cabinet, vacuum suction table and so on. Welcome your inquiry.